View FSB43004A_8385971.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

?2015 fairchild semiconductor corporation 1 www.fairchildsemi.com FSB43004A rev. 1.1 FSB43004A motion spm? 45 lv series may 2015 FSB43004A motion spm ? 45 lv series features ? ul certified no.e209204(ul1557) ?40 v, r ds(on) =3.0 m ?? max.) ? 3-phase mosfet inverter module including control ic for gate drive and protection. ? ceramic substrate. ? three separate open-emitter pins from low-side mosfets for three-leg current sensing. ? single-grounded power supply for built-in hvic. ? isolation rating of 800 vrms/min. applications motion control - home appliance / industrial motor. general description FSB43004A is a motion spm ? 45 lv module that fairchild developed based on low-loss powertrench ? mosfet technology as a compact motor drive inverter solution for small power applications supplied by low voltage battery. figure 1. packing drawing ( click to activate 3d content ) package marking and ordering information device device marking package packing type quantity FSB43004A FSB43004A spmaa-a22 rail 14
?2015 fairchild semiconductor corporation 2 www.fairchildsemi.com FSB43004A rev. 1.1 FSB43004A motion spm? 45 lv series integrated power functions ?40 v r ds(on) = 2.1 m ?? typ.) inverter for three-phase dc / ac pow er conversion (please refer to figure 3) integrated drive, protection, and system control functions ? for inverter high-side mosfets: gate drive circ uit, high-voltage isolated high-speed level shifting, under-voltage lock-out (uvlo) protection. ? for inverter low-side mosfets: gate drive ci rcuit, under-voltage lock-out (uvlo) protection. ? fault signaling: corresponding to uv (low-side supply). ? input interface: active-high interface, wor ks with 3.3 / 5 v logic, schmitt-trigger input pin configuration figure 2.top view
?2015 fairchild semiconductor corporation 3 www.fairchildsemi.com FSB43004A rev. 1.1 FSB43004A motion spm? 45 lv series pin descriptions pin number pin name pin description 1 p positive dc-link input 2 w w phase output 3 v v phase output 4 u u phase output 5n w negative dc-link input 6n v negative dc-link input 7n u negative dc-link input 8v fo fault output 9in (ul) pwm input for low-side u phase mosfet drive 10 in (vl) pwm input for low-side v phase mosfet drive 11 in (wl) pwm input for low-side w phase mosfet drive 12 com common supply ground 13 vcc common supply voltage for ic and low-side mosfet drive 14 in (uh) pwm input for high-side u phase mosfet drive 15 in (vh) pwm input for high-side v phase mosfet drive 16 in (wh) pwm input for high-side w phase mosfet drive 17 v b(u) supply voltage for high-si de u phase mosfet drive 18 v s(u) supply ground for high-side u phase mosfet drive 19 v b(v) supply voltage for high-side v phase mosfet drive 20 v s(v) supply ground for high-side v phase mosfet drive 21 v b(w) supply voltage for high-side w phase mosfet drive 22 v s(w) supply ground for high-side w phase mosfet drive
?2015 fairchild semiconductor corporation 4 www.fairchildsemi.com FSB43004A rev. 1.1 FSB43004A motion spm? 45 lv series internal equivalent circ uit and input/output pins figure 3. internal block diagram lvic vfo vcc in(ul) in(vl) in(wl) com out(ul) out(vl) out(wl) n w (5) u (4) v (3) w (2) p (1) (21) v s(w) (22) v b(w) (19) v s(v) (20) v b(v) (8) v fo (11) in (wl) (10) in (vl) (9) in (ul) (12) com hvic vb(w) com vs(w) (16) in (wh) (15) in (vh) (17) v s(u) (18) v b(u) (14) in (uh) out(wh) n v (6) n u (7) vb(v) vs(v) vb(u) vs(u) vcc in(wh) in(vh) in(uh) out(vh) out(uh) vs(w) vs(v) vs(u) (13) v cc
?2015 fairchild semiconductor corporation 5 www.fairchildsemi.com FSB43004A rev. 1.1 FSB43004A motion spm? 45 lv series absolute maximum ratings (t j = 25c, unless otherwise specified.) inverter part 1st note: 1. rating value of marking ?*? is calculation value or design factor. control part total system thermal characteristics symbol parameter conditions rating unit v pn dc link input voltage drain-source voltage applied between p - n (u) , n (v) , n (w) 40 v * i d drain current t c = 25c, t j 150c 71 a t c = 100c, t j 150c 47 a * i dp peak drain current t c = 25c, under 1ms pulse width, t j 150c 180 a * p d maximum power dissipation t c = 25c, per chip, t j 150c 31 w t j operating junction temperature -40 ~ 150 c symbol parameter conditions rating unit v cc supply voltage applied between v cc - com 20 v v bs supply voltage applied between v b(u) - v s(u) , v b(v) - v s(v) , v b(w) - v s(w) 20 v v in pwm signal voltage applied between in (uh) , in (vh) , in (wh) , in (ul) , in (vl) , in (wl) - com -0.3 ~ v cc +0.3 v v fo fault output supply voltage applied between v fo - com -0.3 ~ v cc +0.3 v i fo fault output current sink current at v fo pin 1 ma symbol parameter conditions rating unit t stg storage temperature -40 ~ 150 c v iso isolation voltage 60 hz, sinusoidal, ac 1 minute, connect pins to ceramic substrate 800 v rms symbol parameter condition min. typ. max. unit r th(j-c) junction to case thermal resistance inverter mosfet part(per 1/6 module) - - 3.92 c/w
?2015 fairchild semiconductor corporation 6 www.fairchildsemi.com FSB43004A rev. 1.1 FSB43004A motion spm? 45 lv series electrical characteristics (t j = 25c, unless otherwise specified.) inverter part 2nd notes: 1. bv dss is the absolute maximum voltage rating between drain and source terminal of each mosfet. v pn should be sufficiently less than this value considering the effect of the stray inductance so that v ds should not exceed bv dss in any case. 2. t on and t off include the propagation delay time of the internal drive ic. t c(on) and t c(off) are the switching time of mosfet itself under the given gate driving condition inter- nally. for the detailed information, please see figure 4. figure 4. switching time definition symbol parameter conditions min. typ. max. unit bv dss drain-source breakdown voltage v in =0 v, i d =250 ? a (2nd notes 1) 40 - - v r ds(on) drain-source on resistance v cc = v bs = 15 v, v in = 5 v, i d = 60 a - 2.1 3.0 m ? v sd source-drain diode forward voltage v cc = v bs = 15 v, v in = 0 v, i sd = 60 a - 0.8 - v t on switching characteristic v pn = 20 v, v cc = v bs = 15 v, i d = 60 a, v in = 0 v ? 5 v, high side, inductive load (2nd notes 2) - 1750 - ns t c(on) - 900 - ns t off - 2600 - ns t c(off) - 800 - ns t rr -60- ns i rr -3- a t on v pn = 20 v, v cc = v bs = 15 v, i d = 60 a, v in = 0 v ? 5 v, low side, inductive load (2nd notes 2) - 1900 - ns t c(on) - 850 - ns t off - 2600 - ns t c(off) - 850 - ns t rr -60- ns i rr -6- a i dss drain-source leakage current v ds = v dss --250 ? a v ds i d v in t on t c(on) 10% i d 10% v ds 90% i d 100% i d t rr 100% i d v ds i d v in t off t c(off) 10% v ds 10% i d (a) turn-on (b) turn-off
?2015 fairchild semiconductor corporation 7 www.fairchildsemi.com FSB43004A rev. 1.1 FSB43004A motion spm? 45 lv series control part recommended oper ating conditions symbol parameter conditions min. typ. max. unit i qcc quiescent v cc supply current v cc = 15 v, v in = 0 v v cc - com - - 2.75 ma i qbs quiescent v bs supply current v bs = 15 v, v in = 0 v v b(u) - v s(u) , v b(v) -v s(v) , v b(w) - v s(w) --0.3ma v foh fault output voltage 10 k ? to 5 v pull-up normal 4.5 - - v v fol fault --0.5v uv ccd supply circuit under- voltage protection detection level 7.0 8.2 10.0 v uv ccr reset level 8.0 9.4 11.0 v uv bsd detection level 7.0 8.0 9.5 v uv bsr reset level 8.0 9.0 10.5 v t fod fault-out pulse width 30 - - ? s v in(on) on threshold voltage applied between in (uh) , in (vh) , in (wh) , in (ul) , in (vl) , in (wl) - com --2.6v v in(off) off threshold voltage 0.8 - - v symbol parameter conditions value unit min. typ. max. v pn supply voltage applied between p - n (u) , n (v) , n (w) -20-v v cc control supply voltage applied between v cc - com 13.51516.5v v bs control supply voltage applied between v b(u) - v s(u) , v b(v) - v s(v) , v b(w) - v s(w) 13.01518.5v dv cc /dt, dv bs /dt control supply variation -1 - 1 v/ ? s v sen voltage for current sensing applied between n u , n v , n w - com (including surge voltage) -4 - 4 v
?2015 fairchild semiconductor corporation 8 www.fairchildsemi.com FSB43004A rev. 1.1 FSB43004A motion spm? 45 lv series mechanical characteristics and ratings figure 5. flatness measurement position parameter conditions limits units min. typ. max. mounting torque mounting screw: - m3 0.51 0.62 0.72 n?m device flatness see figure 5 - - 120 ? m weight -8.4- g + +
?2015 fairchild semiconductor corporation 9 www.fairchildsemi.com FSB43004A rev. 1.1 FSB43004A motion spm? 45 lv series time charts of protective function a1 : control supply voltage rises: after the voltage rises uv ccr , the circuits start to operate when the next input is applied. a2 : normal operation: mosfet on and carrying current. a3 : under-voltage detection (uv ccd ). a4 : mosfet off in spite of control input condition. a5 : fault output operation starts. a6 : under-voltage reset (uv ccr ). a7 : normal operation: mosfet on and carrying current. figure 6. under-voltage protection (low-side) b1 : control supply voltage rises: after the voltage reaches uv bsr , the circuits start to operate when the next input is applied. b2 : normal operation: mosfet on and carrying current. b3 : under-voltage detection (uv bsd ). b4 : mosfet off in spite of control input c ondition, but there is no fault output signal. b5 : under-voltage reset (uv bsr ). b6 : normal operation: mosfet on and carrying current figure 7. under-voltage protection (high-side) input signal output current fault output signal control supply voltage reset uv ccr protection circuit state set reset uv ccd a1 a3 a2 a4 a6 a5 a7 input signal output current fault output signal control supply voltage reset uv bsr protection circuit state set reset uv bsd b1 b3 b2 b4 b6 b5 high-level (no fault output)
?2015 fairchild semiconductor corporation 10 www.fairchildsemi.com FSB43004A rev. 1.1 FSB43004A motion spm? 45 lv series 3rd notes: 1. to avoid malfunction, the wiring of each input should be as short as possible. (less than 2~3 cm) 2. v fo output is open drain type. this signal line should be pulled up to the positive side of the mcu or control power supply with a resistor that makes i fo up to 1 ma. 3. input signal is high-active type. there is a 5 k resistor inside the ic to pull down each input signal line to gnd. rc coupling circuits is recommended for the prevention of input signal oscillation. r f c f constant should be selected in the range 50~150ns . ( recommended r s =100 , c ps =1 nf) 4. each capacitors should be mounted as close to the spm ? pins as possible. 5. relays are used at almost every systems of electrical equipm ent of home appliances. in these cases, there should be suffici ent distance between the cpu and the relays. 6. the zener diode should be adopted for the protection of ics from the surge destruction between each pair of control supply terminals. (recommended zener diode=24 / 1 w) figure 8. typical a pplication circuit fault +15v c bs c bs c sp15 +5v r pf motor v dc c dcs gating uh gating vh gating wl gating vl gating ul c pf m c u r sh current sensing r s r s r s r s r s r s r bs d bs r bs d bs lvic vfo vcc in(ul) in(vl) in(wl) com out(ul) out(vl) out(wl) n w (5) u (4) v (3) w (2) p (1) (21) v s(w) (22) v b(w) (19) v s(v) (20) v b(v) (8) v fo (11) in (wl) (10) in (vl) (9) in (ul) (12) com hvic vb(w) com vs(w) (16) in (wh) (15) in (vh) (17) v s(u) (18) v b(u) (14) in (uh) out(wh) n v (6) n u (7) vb(v) vs(v) vb(u) vs(u) vcc in(wh) in(vh) in(uh) out(vh) out(uh) vs(w) vs(v) vs(u) (13) v cc c bs r bs d bs c ps c ps c ps gating wh c ps c ps c ps c bsf c bsf c bsf c sp15f
?2015 fairchild semiconductor corporation 11 www.fairchildsemi.com FSB43004A rev. 1.1 FSB43004A motion spm? 45 lv series detailed package outline drawings package drawings are provided as a servic e to customers considering fairchild co mponents. drawings may change in any manner without notice. please note the revision and/or data on the drawing and contact a fairchildsemicondu ctor representative to veri fy or obtain the most recent revision. package s pecifications do not expand the terms of fa irchild?s worldwide therm and conditions, specifically the the warranty therei n, which covers fairchild products. always visit fairchild semiconduct or?s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/dwg/mo/mod22aa.pdf
?2015 fairchild semiconductor corporation 12 www.fairchildsemi.com FSB43004A rev. 1.1 FSB43004A motion spm? 45 lv series

▲Up To Search▲

Price & Availability of FSB43004A

	To Download FSB43004A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .